Vintagedesign

Mono, all class-A compressor based around the compressor section of the CL1mk2. Like the CL1mk2 the C1mk2 a balanced input and output through Carnhill/St'Ives transformers. The combining of transformer-balanced circuits and a diode bridge...

Single channel, all class-A microphone and line preamp with 3-band equalizer.The mic preamp is the same 3-stage circuit used in the DMP mk2.Like the DMP mk2,the impedance of the microphone input is switchable between 300 and 1200 ohms...

Vintagedesign CA81mk2 ("Neve" mic preamp/eq) is a single-channel,all class-A microphone and line preamp with 4-band equalizer.The mic preamp is the same 3-stage circuit used by the Vintagedesign DMPmk2.The impedance of the microphone input is switchable

Fully discrete Vintagedesign class-A stereo compressor/limiter CL1mk2 is based around classic diode bridge designs of the 1960’s and 1970’s. Diode bridge dynamics controllers are revered for their smooth gain control...

All class-A,dual-channel microphone preamp,each channel featuring dual preamp stages and a transformer balanced,single-ended output stage.The second preamp stage is switched in only at higher gain settings to avoid extra noise...

3-band Class-A EQ module using the same circuitry and components as in the CA73mk2 like Carnhill inductors and ELMA switches.EQ73D is NOT a standalone EQ unit!It's made to be inserted into M73,M87 or a DMP unit and operates at -18dB inserts via TRS jack

Vintage style Preamp for 500 series rack format.M581 has been updated to M581mk2.The major changes are that the front XLR is removed and that the Hi-Z input will is feeded trough the inputtransformer to get it's character...

The single-channel M73D features the same class-A microphone preamp found in Vintagedesign’s DMPmk2 and CA73/81mk2. The instrument input features a high-impedance FET input that feeds the input-transformer via a class-A driver stage!

M87D features the same class-A output-stage and transformer as found in Vintagedesign’s 19" units and M73D. The input-stage is an updated version of the stage found in the M81R and M581.New function is the "AIR" switch which boosts the high frequences

Vintagedesign "Neve" pre/eq/compressor ProPack is an old school channel strip. ProPack is more or less Vintagedesign CA73mk2 and a C1mk2 under the same hood.Its inputstage is an updated version of the M81 inputstage...

Power supply for the Vintagedesign 19-inch units. One PSU-D will supply two units.

SU2 is a 16-channel summing unit.Its signalpath is a fully discrete circuit design with six discrete amplifiers and two single-ended transformer balanced class-A amplifiers.This is the optimal unit in this pricerange,offering both serial and parallel...